บริษัทมีบริการรับซื้อ/รับแลกเปลี่ยนเครื่องเก่าของลูกค้าให้ราคาเป็นธรรม เงื่อนไขการชำระเงินลูกค้าสามารถเลือกได้ทั้งแบบเงินสดและแบบผ่อนและสามารถเลือกระยะเวลาในการผ่อนชำระได้ สนใจสอบถามรายละเอียดเพิ่มเติมได้ที 081-6425018 02-5317933

เครื่องมิลลิ่ง CNC Maco CNC T5 T7

  • สอบถามรายละเอียด 081-6425018 02-5317933
  • ดาวน์โหลด สเปกสินค้ารุ่นนี้
  • สเปก เครื่องมิลลิ่ง CNC Maco CNC T5 T7
  • เครื่องมิลลิ่ง CNC Maco T5/T7
  • FEATURE
  • The T series upgrades the value of drilling tapping center. The machines are designed and improved by refering to some Japanese excellent machines. In addition, the T5 and T7 models feature exclusive design in positioning as well as oversized ball screws and linear ways. High running speed and high feed rates are only basic features. The enhanced features on our drilling tapping center are unmatched accuracy and rigidity.
  • 1. Base and column are designed with great span between slideways for maximum stability‭.‬
  • 2. The direct-drive high speed spindle provides sensitive response with 6,000‭ ‬rpm for tapping operations‭.‬
  • 3. 48‭ ‬meters‭ (‬60‭ ‬meters‭) ‬rapid traverse on three axes greatly reduces machining time‭.‬
  • 4. Increased height of column has sufficient space to mount the 4th and 5th axes.
  • 5. High speed servo drive tool changer is fast and stable that reduces non-cutting time.
  • 6. Rear chip removing design features excellent chip removing angle and large flow chip flushing system.
  • Taiwan Master Tool Magazines.
  • The entire series of machine employs‭ ‬Taiwan master tool magazines.
  • The tool pockets are manufactured from aluminum alloy and T6‭ ‬treated for maximum durability‭.‬
  • Front mounted air cylinder enables repair or maintenance to be accomplished in only 10‭ ‬minutes‭.‬
  • Short Spindle Nose
  • The short spindle nose design allows the spindle motor to fully develop transmission efficiency‭. ‬As a result‭, ‬machining accuracy‭ ‬is upgraded and spindle life is extended‭.‬
  • Ball Screw、Linear Motion Guide
  • The silent ball screws and linear guide ways on three axes feature high rigidity‭, ‬low noise‭, ‬low friction and high sensitivity‭, ‬providing an increase in machining speed and accuracy‭.‬
  • Pneumatic counter-balance on Z-axis
  • The Z-axis is designed with no counter-balance weight in combination with servo motor drive with brake to improve Z-axis drive performance‭. ‬Therefore‭, ‬high speed and better surface finish can be achieved‭.‬
  • Full-enclosed Guards
  • Fully enclosed guards ensure smooth movement at high speed and low noise‭. ‬The guards isolate coolant and chips and provide a protection for linear ways and ball screws for extending their service life‭.‬
  • Standare Accessories:
  • BT30 spindle
  • 12,000 rpm direct-drive spindle
  • Gripper type magazine (BT30,14 tools)
  • Spindle oil cooler
  • Automatic lubrication system
  • Ethernet transfer
  • LED work ligh
  • Rigid tapping
  • M30 automatic power off
  • Option Accessories:
  • 15,000/24,000 rpm direct-drive spindle
  • Servo magazine
  • Programmable coolant nozzle adjustment
  • Coolant through spindle (15 bar/20 bar)
  • 4th axis rotary table and tailstock
  • Automatic tool measuring device
  • Increase height of column
  • Screw type chip conveyor
  • Link chain type chip conveyor
  • Grease lubrication systemOil / fluid separation device
  • Coolant gun and air gun
   
 สินค้าที่เกี่ยวข้อง